BLAUGUSTINE / BACK TO ARCHIVE
29 October 2014
ADVANCE NOTICE OF PUBLICATION
I'm copying below a reduced version of the announcement which Frances and Nicolas McDowall have sent to their mailing list. Are you on it? If you want to be, contact The Old Stile Press. Apparently nearly all of the Special copies have already been reserved! Prices of the edition not yet known but will be within the range of other OSP publications. See their catalogue.
22 October 2014
Folded sheets of milky white Canaletto Liscio, the text set in confident but not combative Storm Sans, beautifully printed in deep turquoise blue on one side and in maroon on the reverse... twenty four, yes twenty-four, different coloured inks have been used for the text throughout the book, complementing the strong black images.
The stack sitting on my table consists of one hundred and fifty copies of the final four pages of Trans-Siberian Prosody and Little Jeanne from France which Dick Jones, the translator of Blaise Cendrars' fabulously fabulating poem, and myself, its illustrator, spent this morning signing. This ritual usually takes place at the home of The Old Stile Press in Wales but geographical distance, time and logistics did not coalesce on this occasion and I'm recording it here for Posterity, whoever she might be.
I've eliminated my head from the photo below because...well, you can guess why. The word starts with V and is repeated twice in Latin and it means the camera either lies or tells the truth and some of us can't face it. Dick on the other hand looks fine so I've left his head in place.
The signing does not mean that the day of publication is upon us quite yet but only that this stack of sheets can now be sent back to The Old Stile Press, rejoining the much bigger stack of sheets for the whole book which will, when complete, be sent to the binders for beautiful binding designed by moi and Nicolas McDowall. Watch this space.
Technical things always seem to go wrong when you need them most. I don't know if that statement is generally true but it seems so to me.
My etching press, as often mentioned before, is an essential tool and I've currently been using it for printing relief blocks (for the 'Trans-Siberian' book) rather than etchings. The difference is basically in the thickness of inked blocks or plates which must pass under the roller in order for ink to transfer to the printing paper. Etchings are generally on thin metal plates and require heavy pressure - adjusted by tightening the top screws - whereas relief blocks can be any thickness and only need fairly light pressure since the ink lies on the surface of the block rather than in grooves below the surface (intaglio) as in etchings.
Unlike some of the more modern machines, it's not possible on my press to raise or lower the heavy steel top roller to allow any thickness of block to pass through. The DIY way of solving this problem is to loosen pressure completely, push through on either side of the roller a couple of flat wooden runners same height as the intended blocks, then tighten the screws again as needed. This I did and it worked fine for about a hundred proofs from relief blocks.
But recently an ominous bump developed in the middle of the press bed and though I tried to ignore it, when a vinyl block I was printing was bent beyond recognition and a cracking sound came from the press, drastic action had to be contemplated. Examination revealed that a sheet of formica, glued to the steel bed over thirty years ago and firmly in place all this time, had suddenly come unstuck in the centre, though not at the top and bottom edges. Result: solid bump in the middle. Reluctant remedy: get rid of offending formica. Easier said than done. This was all taking place around 2 am, by the way.
Struggling to lift the formica stuck to the edges of the base I succeeded in breaking off pieces while rough bits of the backing remained glued to the metal - that's the reddish-brown mess showing in the photo below - it looks like rust but isn't. Note the strip of wood keeping the roller off the base, but not enough to let the steel bed run right off the press which, in the worst scenario, would chop my feet off, or would fall to the floor and stay there because I wouldn't be able to lift it back up. Minutely accurate, heart-stopping attention to the top screws was needed to prevent such a disaster from happening.
Below I'm pushing a knife under the formica with one hand while the other hand (invisible) attempts to hold the camera and the roller screw simultaneously.
To make a long story a bit shorter, I did manage to escape injury and to remove all the formica, but not the residue from its backing which resisted all scrubbing with steel wool etc. So I decided to let it be but to stick a length of Fablon over it and the whole of the metal bed - another hair-tearing, tooth-grinding task that could only be undertaken in the crazy hours of the night by a stubborn fool.
There is a happy ending: my beloved machine is now restored to peaceful, purring operation and I can get on with printing new blocks for the special prints to be included with the special extra copies of Trans-Siberian Prosody and Little Jeanne from France currently in production at The Old Stile Press.
And here is something beautiful to conclude and to celebrate the marvellous Indian summer weather we've been enjoying in London.
Consider the lilies of the field....